Error messages – Motorola CAJUN P120 User Manual
Page 114
Chapter 7
Cajun Campus CLI (Command Line Interface)
100
Cajun P120 User’s Guide
Error Messages
You may receive the following error messages when using the CLI.
•
The privilege level timer has expired. You have been
removed from the privilege level.
After 20 minutes without keyboard activity, you are automatically removed
from the privilege level and returned to the non privilege level. To re-enter the
privilege level use the login or flogin command and enter the password.
•
Set first parameter is wrong
or
set parameter(s) is wrong
The value you entered is not found in the list of valid values for this parameter.
Check the list of valid values and check your spelling.
•
CANNOT perform SET, XXX value is wrong!
The value you entered is not within the valid range for this parameter (XXX is
any parameter you tried to set, for example port speed).
•
This command can only be executed in the privilege level.
Enter privilege level with ENABLE.
You must be in privilege level to use the command you entered. To enter
privilege level use the login command and enter the password.