Metrologic Instruments Stratos MS2xxx Series - Manual (Page 17)

12
S
CALE
/L
OAD
C
ELL
C
ONFIGURATION
B
AR
C
ODES
Dual Cable Scale Configuration Bar Codes
Scale Protocols
The following bar codes will change scale parameters intended for a
Dual Cable environment. To place the scanner in Dual Cable mode,
please refer to page 20.
The MS2xx0 must be in scale program mode to use these bar codes.
Scale = NCI-ECR Protocol
³ 9 9 6 0 1 5
Set the scale RS232 protocol to NCI-ECR.
Communication Port Settings:
• 9600 Baud
• 8 Data Bits
• 1 Stop Bit
• No
Parity
Scale = NCI Protocol
³ 9 9 6 0 1 6
Reserved for Future NCI Protocol Variation