Metrologic Instruments Stratos MS2xxx Series - Manual (Page 23)

18
S
CALE
/L
OAD
C
ELL
C
ONFIGURATION
B
AR
C
ODES
Dual Cable Scale Configuration Bar Codes
COM Port Settings (Data Bits & Parity)
The following bar codes will change scale parameters intended for a
Dual Cable environment.
If a Scale Protocol bar code from page 11 or 13 is used, the bar codes
below must be scanned after the Scale Protocol bar code in order to be
effective.
The MS2xx0 must be in scale program mode to use these bar codes.
Scale = Even Parity
³ 9 9 6 0 2 5
Set the scale communication to even parity.
Scale = No Parity
³ 9 9 6 0 2 6
Set the scale communication to no parity.