Metrologic Instruments Stratos MS2xxx Series - Manual (Page 44)

39
S
CANNER
C
ONFIGURATION
B
AR
C
ODES
Additional POS Data Formatting
Special Function Command Responses
The following codes do not require that the MS2xx0 to be in scale
program mode.
Spec Func 30-30 Status
³ 1 4 2 2 1 5
Returns Special Function commands in the
30-30 status as opposed to the 33-30 status.
Note: Requires ‘Spec Func Ans 3x-30’ on
page 38 to be set.
*No Spec Func 30-30 Status
³ 1 4 2 2 0 5
Disables redirection of Special Function
3x-30 status to 30-30 status.
* Factory Default Setting