Invacare Top End X-Terminator QR - Manual (Page 25)

SECTION 3—SAFETY INSPECTION
Part No 1114851 25 Everyday and Sport Series Wheelchairs
❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come
to a gradual stop.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect tires for flat spots and wear.
❑ If pneumatic tires check for proper inflation.
❑ Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑ Ensure hand grips (if equipped) are not loose.
❑ Ensure quick release axles and camber inserts are clean.
❑ Ensure quick/quad release axles lock properly.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Inspect spokes for bent or broken spokes.
❑ Ensure All spokes uniformly tight.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks
and wear, and should be replaced if damaged.
❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come
to a gradual stop.
❑ Inspect tires for flat spots and wear.
❑ Ensure that casters are free of debris.
❑ If pneumatic tires check for proper inflation.
Inspect/Adjust Monthly
❑ Ensure wheel locks DO NOT interfere with tires when rolling.
❑ Ensure pivot points are free of wear and looseness.
❑ Inspect upholstery fastening flaps to ensure they securely latch.
❑ Ensure that casters are free of debris.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Ensure adjustable axle position camber bar is securely tightened.