Adjusting height, All wheelchairs with swivel anti-tip except, Figure 7.2 – Invacare Top End X-Terminator QR User Manual
Page 69: Figure 7.2)
SECTION 7—FOOTREST/ ANTI-TIPPER
69
Everyday and Sport Series Wheelchairs
Adjusting Height
NOTE: For this procedure, refer to FIGURE 7.2.
All Wheelchairs with Swivel Anti-tip Except Paul Schulte Signature BB and T-5
Tennis Elite Models
1. To adjust the height of the swivel anti‐tip, remove dust cover and loosen set screw on
swivel anti‐tip caster assembly (FIGURE 7.2).
2. Set anti‐tip caster wheel to desired height. Tighten set screw and reinstall dust cover.
Paul Schulte Signature BB and T-5 Tennis Elite Models ONLY
NOTE: For this procedure, refer to FIGURE 7.2, Detail A.
1. Remove the dust cover on the anti‐tip caster fork assembly.
2. Remove the locknut that secures the anti‐tip caster fork assembly to the anti‐tipper.
3. Adjust the height of the anti‐tip caster fork assembly to the desired height by either
adding or removing spacers from the fork stem.
4. Reinstall locknut and dust cover onto the wheelchair.
FIGURE 7.2 Installing/Removing/Adjusting Swivel Anti-Tip
NOTE: View
facing back of
wheelchair.
Anti-Tippers
Anti-Tipper
Set Screw
Anti-Tipper
Receiver
DETAIL “A”
Anti-Tippers
Dust Cover
Locknut
Spacers
Anti-Tip
Caster Fork
Assembly