Printing test prints from the density control pane, While you hold down the color select push butto, Use the (–) or (+) push button to choose a test – IBM S544-5361-01 User Manual

Page 138

Text mode
Original mode

Advertising

6–24

IBM Network Color Printer Operator’s Guide

Printing Test Prints from the Density Control Panel

This section tells you how to print a test print using the density control panel.

You can print test prints in various grid and line patterns to use during
diagnostic procedures. Use the following procedure to print a test print from
the density control panel.

1. While you hold down the COLOR SELECT push button, press the ENTER

push button 8 times. All the color lights flash and the printer enters the test
pattern selection mode.

2. Use the (–) or (+) push button to choose a test pattern. The light for the test

pattern you selected flashes if the setting is different from the factory
default.

Advertising