IBM S544-5361-01 - Manual (Page 73)

Chapter 4. Using the Operator Panel 4–23
Setting the Power Savings Mode
Use the following procedure to set or change the Power Savings mode. The
Power Savings mode allows you to set the amount of time that the printer
remains idle before it changes to a low power consumption mode (Energy
Star). You can set a time from 15–120 minutes in increments of 15 minutes.
1. Access the System Setup menu (see “Accessing the System Setup
Menu” on page 4–19).
2. Use the Menu Scrolling push buttons (
↑↓
) to scroll through the items
until you see POWER SVNGS (M) on the second line of the display panel.
3. Press the Enter push button. POWER SVNGS moves up to the first line of
the display panel and you see the current setting on the second line.
4. Use the Menu Scrolling push buttons (
↑↓
) to scroll through the available
settings until you see the one that you want. 120 is the default. Press the
Enter push button.
5. Press the Menu push button 3 times. You see EXIT SETUP on the first line
of the display panel and the default setting, NO , on the second line.
6. Press the down Menu Scrolling push button (
↓
) to see YES on the
second line.
7. Press the Enter push button. You see SAVE CHANGES on the first line of
the display panel and the default setting, YES , on the second line. Press
the Enter push button to save the changes.