Remove the cleaning connector cover, A. push in the tab [2] on the front of the connect, B. pivot the cover to the front of the printer and – IBM S544-5361-01 User Manual

Page 171: C. unplug the connector [6] by pulling on the wire

Advertising
background image

Chapter 8. Maintaining the Printer

8–13

2. Remove the cleaning connector cover.

a. Push in the tab [2] on the front of the connector cover [3] to disengage

it from its slot [1].

b. Pivot the cover to the front of the printer and disengage the rear clip [4]

from its slot [5]. You may have to move the cover from side to side
several times to disengage the clip. Be careful not to break the clip.

c. Unplug the connector [6] by pulling on the wires (not by pulling on the

white connector).

Advertising
See also other documents in the category IBM Printers: