Push up the handle on the underside of the tray, Press the release button and slide the paper-wi, Lift the paper-length guide slightly and slide – IBM S544-5361-01 User Manual
Page 37
Chapter 3. Loading Paper and Transparencies
3–3
Use the following procedure to load paper into either tray 1 or tray 2.
1. Push up the handle on the underside of the tray and pull out the tray (tray 1
is shown here).
2. Press the release button and slide the paper-width guide to the size of
paper to be loaded. Release the button to lock the guide in place. Where
you set the paper-width guide determines how the printer knows what size
of paper is in the tray. Make sure that the paper-width-guide setting
matches the size of paper to be loaded.
Note: If there is paper in the tray already, you must remove it before adjusting
the paper-width guide.
3. Lift the paper-length guide slightly and slide it to select the paper length
that you want. Release the guide to lock it in place.