Invacare ARROW MWD - Manual (Page 9)

9
GENERAL GUIDELINES PROCEDURE 1
G
E
N
E
R
A
L
G
U
I
D
E
L
I
N
E
S
WARNING/CAUTION LABEL LOCATION - RWD MODELS
SUSPENSION ARM USED
WITH GEARLESS/BRUSHLESS
MOTOR
NOTE: WARNING LABEL also
found on side frame near the rear
of the chair.
SUSPENSION ARM
U S E D
WITH CONVENTIONAL
MOTOR/GEARBOX
ASSEMBLY
NOTE: These caution labels are only found on bat-
tery boxes used with the gearless/brushless motor
GROUP 24 BATTERIES GROUP 22 BATTERIES
NOTE: This caution label is only
found on wiring harnesses used
with the conventional motor/gear-
box application.
ONE (1) CONNECTOR BATTERY
BOX WIRING HARNESS
NOTE: For models with the gearless/brushless motor, read the
manufacturer’s CAUTION LABEL located on side of the motor.
(Drive wheel must be removed to view caution label.)
NOTE: This wiring harness is found on wheel-
chair models built BEFORE 11/15/99.
NOTE: This wiring harness is found on
wheelchair models built AFTER 11/15/99.
1070497
MUST