Infinite Peripherals KPM-210 - Manual (Page 46)

3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS
KPM210/216 19 3-
8-dot bit image 24-dot bit image
[Default]
[Reference]
[Example]
n - C S E n - C S E n - C S E n - C S E n - C S E
[Name] Turn underline mode on/off
[Format] ASCII ESC - n
Hex 1B 2D n
Decimal 27 45 n
[Range] 0
≤
n
≤
2, 48
≤
n
≤
50
[Description] Turns underline mode on or off, based on the following val-
ues of n:
n = 0, 48
Turns off underline mode
n = 1, 49 Turns on underline mode (1-dot thick)
n = 2, 50 Turns on underline mode (2-dot thick)
[Notes] • The printer can underline all characters, but cannot under-
line the space set by HT and right-side character spacing.
• The printer cannot underline 90°/270° rotated characters
and white/black inverted characters.
• When underline mode is turned off by setting the value of n
to 0 or 48, the data which follows is not underlined.
• Underline mode can also be turned on or off by using
ESC !. Note, however, that the last received command is the
effective one.
[Default] n=0
www.ipcprint.com