Infinite Peripherals KPM-210 User Manual
Page 74
3. PRINTER FUNCTIONS
3. PRINTER FUNCTIONS
KPM210/216
47
3-
[Description]
Sets the printing area width to the area specified by nL and
nH.
• The value of nMax is :
- 1664 for the 204 dpi model
- 2484 for the 300 dpi model
• The left margin is set to [(nL + nH
Ч
256)
Ч
(horizontal mo-
tion unit)] inches.
Printable area
Left margin
Printing area width
[Notes]
• This command is only enabled if set at the beginning of the
line.
• If the right margin is greater than the printable area, the
printing area width is set at maximum value.
• If the printing area width = 0, it is set at the maximum value.
• The horizontal and vertical motion units are specified by
GS P. Changing the horizontal or vertical motion unit does not
affect the current left margin.
• The GS P command can change the horizontal (and verti-
cal) motion unit.
• However, the value cannot be less than the minimum hori-
zontal movement amount and it must be in even units of the
minimum horizontal movement amount.
[Default]
[Reference]
GS L, GS P
[Example]
m
t
r
^
S
G
m
t
r
^
S
G
m
t
r
^
S
G
m
t
r
^
S
G
m
t
r
^
S
G
[Name]
Execute macro
[Format]
ASCII
GS
^
r
t
m
Hex
1D
5E
r
t
m
Decimal
29
94
r
t
m
[Range]
0
≤
r, t
≤
255
www.ipcprint.com