Infinite Peripherals KPM-210 User Manual
Page 85
3. PRINTER FUNCTIONS
KPM210/216
58
3-
When y is set to 0, the default setting value is used.
[Notes]
• The horizontal direction is perpendicular to the paper feed
direction.
• In standard mode, the following commands use x or y, re-
gardless of character rotation (upside-down or 90° clockwise
rotation):
Q
Commands using x : ESC SP, ESC $, ESC \, GS L, GS
W.
R
Commands using y : ESC 3, ESC J.
• This command does not affect the previously specified
values.
• The calculated result from combining this command with
others is truncated to the minimum value of the mechanical
pitch or an exact multiple of that value.
[Default]
x = 204, y = 408
for the model 204 dpi
x = 300, y = 600
for the model 300 dpi
[Reference]
ESC SP, ESC $, ESC \, ESC 3, ESC J, GS L, GS W, GS P
[Example]
S
GS
GS
GS
GS
G
α
αααα
n
n
n
n
n
[Name]
Enable / disable automatic FULL STATUS back
[Format]
ASCII
GS
α
n
Hex
1D
E0
n
Decimal
29
224 n
[Range]
0
≤
n
≤
255
[Description]
Enable / disable automatic full status back.
n specifies the composition of FULL STATUS as follows:
(Tab.A.3)
www.ipcprint.com