Infinite Peripherals KPM-210 User Manual
Page 72
3. PRINTER FUNCTIONS
3. PRINTER FUNCTIONS
KPM210/216
45
3-
H
n
L
n
L
S
G
H
n
L
n
L
S
G
H
n
L
n
L
S
G
H
n
L
n
L
S
G
H
n
L
n
L
S
G
[Name]
Set left margin
[Format]
ASCII
GS
L
nL
nH
Hex
1D
4C
nL
nH
Decimal
29
76
nL
nH
[Range]
0
≤
nL, nH
≤
255
[Description]
Sets the left margin.
• The left margin is set to [(nL + nH
Ч
256)
Ч
(horizontal mo-
tion unit)] inches.
Printable
Left margin
Printing area width
[Notes]
• This command is enabled only if set at the beginning of the
line.
• If the setting exceeds the printable area, the maximum
value of the printable area is used.
• If the left margin + printing area width is greater than the
printable area, the printing area width is set at maximum
value.
• The horizontal and vertical motion unit are specified by
GS P or GS $D0. Changing the horizontal or vertical motion
unit does not affect the current left margin.
• The GS P or GS $D0 command can change the horizontal
(and vertical) motion unit.
• However, the value cannot be less than the minimum hori-
zontal movement amount and it must be in even units of the
minimum horizontal movement amount.
[Default]
[Reference]
GS P or GS $D0, GS W
[Example]
www.ipcprint.com