Infinite Peripherals KPM-210 - Manual (Page 8)

INTRODUCTION
KPM210/216 2
•
Only use the printer on hard surfaces and in environments that guarantee
proper ventilation.
•
Make sure the printer is placed in such a way as to avoid damage to its
wiring.
•
Use the type of electrical power supply indicated on the printer label. If in
doubt, contact your retailer.
•
Do not block the ventilation openings.
•
Do not introduce foreign objects of any kind into the printer as this could
cause a short circuit or damage parts that could jeopardize printer
functioning.
•
Do not spill liquids onto the printer.
•
Do not carry out technical operations on the printer, with the exception of
the scheduled maintenance procedures specifically indicated in the user
manual.
•
Disconnect the printer from the electricity supply and have it repaired by a
specialized technician when:
A. The feed connector has been damaged.
B. Liquid has seeped inside the printer.
C. The printer has been exposed to rain or water.
D. The printer is not functioning normally despite the fact that all
instructions in the users manual have been followed.
E. The printer has been dropped and its outer casing damaged.
F. Printer performance is poor.
G. The printer is not functioning.
UNPACKING THE PRINTER
Remove the printer from its carton being careful not to damage the packing
material so that it may be re-used if the printer is to be transported in the
future.
Make sure that all the components illustrated below are present and that
there are no signs of damage. If there are, contact Customer Service.
1. Paper roll (216mm)
2. Manual (or CD-Rom)
3. Electrical supply cable
4. Upper tray
5. Printer
6. Foam packing shell
7. Box
(Tab.A.3)
www.ipcprint.com