Icom IC-F21GM - Manual (Page 19)

12
4
SET MODE
‘ ‘ Set mode
Set mode is used for programming infrequently changed values or
conditions of functions.
• All settings performed with [CH selector], [OFF/VOL], [MONI],
[PTT] and [W/N] keys.
D D SELECTING RF OUTPUT
POWER
The RF output can be selected
from one of 3 modes. (p. 13)
D D SETTING THE SIMPLEX/DU-
PLEX OPERATION
The Simplex/Duplex function
changes duplex operation to sim-
plex operation. (pgs. 13–14)
D D SETTING THE CTCSS TONE
FREQUENCY
CTCSS (Continuous Tone Coded Squelch System) encoder/decoder
are standard, providing quiet stand-by. (pgs. 15–16)
D D CTCSS FIND
This transceiver can detect the CTCSS tone frequency in the re-
ceived signal. (p. 19)
D D SETTING THE DTCS CODE
DTCS (Digital Tone Coded Squelch system) encoder/decoder are
standard, providing quiet stand-by. (pgs. 17–18)
[MONI]
[PTT]
[W/N]
[OFF
/VOL]
[CH selector]