Icom IC-F21GM - Manual (Page 25)

• DTCS code list
4
SET MODE
18
023
025
026
031
032
043
047
051
054
065 071
072
073
074
114
115
116
125
131
132
134
143
152
155
156
162
165
172
174
205 223
226
243
244
245
251
261
263
265
271 306
311
315
331
343
346
351
364
365
371
411
412
413
423
431
432
445
464
465
466
734
743
754 631
632
654
662
664
703
712
723
731
732 503
506
516
532
546
565
606
612
624
627
• Confirmation beep is emitted. (See p. 17)
!0 Push [PTT] once more, if you want to use Inverse mode.
!1 Push [MONI] to complete the setting.
• Confirmation beep is emitted. (See p. 17)
!2 Turn the power OFF, and then ON again.
[Example]
To assign code ‘261 (normal)’ as CH12;
q While pushing and holding [PTT], [MONI], [W/N], turn [OFF/VOL]
to power ON.
w Select CH 12.
e Push and hold [W/N] until a beep (Pi) is emitted.
r Push [PTT] twice to choose the 100 digit of the code number.
t Push [MONI].
• Confirmation beep is emitted. (See p. 17)
y Push [PTT] six times to choose the 10 digit of the code number.
u Push [MONI].
• Confirmation beep is emitted. (See p. 17)
i Push [PTT] once to choose the 1 digit of the code number.
o Push [MONI].
• Confirmation beep is emitted. (See p. 17)
!0 Push [MONI] to complete the setting.
• Confirmation beep is emitted. (See p. 17)
!1 Turn the power OFF, and then ON again.