Intel KM4AM - Manual (Page 46)

3 - 1 3
BIOS Setup
Integrated Peripherals
Onboard 1394 Chip
This setting is used to enable/disable the onboard IEEE 1394 controller. Setting
options: Disabled, Enabled.
VIA OnChip IDE Device
Press <Enter> to enter the sub-menu and the following screen appears:
On-Chip Serial ATA
This setting is used to specify the SATA controller. Settings: Disable, Enabled.
IDE DMA Transfer Access
This item is used to enable or disable the DMA transfer function of the IDE Hard Drive.
The settings are: Enabled, Disabled.
OnChip IDE Channel 0/1
The integrated peripheral controller contains an IDE interface with support for two
IDE channels. Choose Enabled to activate each channel separately. Settings: Enabled,
Disabled
.