Intel KM4AM - Manual (Page 72)

VIA VT8237 Serial ATA RAID Introduction
4 - 1 3
Once the installation is complete, go to Start ---> Programs --->VIA --->raid_tool.
exe to enable VIA RAID Tool.
After the software is finished installation, it will automati-
cally started every time Windows is initiated. You may
double-click on the icon shown in the system tray of
the tool bar to launch the VIA RAID Tool utility.
Using VIA RAID Tool
The main interface is divided into two windows and the toolbar above contain the
main functions. Click on these toolbar buttons to execute their specific functions.
The left windowpane displays the controller and disk drives and the right window-
pane displays the details of the controller or disk drives. The available features are
as following:
View by Controller
View Event log
View by Devices
Help Topics