Intel KM4AM User Manual
Page 49
Advertising
3 - 1 6
MS-6734 M-ATX Mainboard
on the screen: “EPP Mode Select.” At this time either EPP 1.7 spec or EPP 1.9 spec
can be chosen.
ECP Mode Use DMA
The ECP mode has to use the DMA channel, so choose the onboard parallel port with
the ECP feature. After selecting it, the following message will appear: “ECP Mode
Use DMA.” At this time, the user can choose between DMA channel 3 or 1.
Init Display First
This item specifies which VGA card is your primary graphics adapter. Settings: PCI
Slot
and AGP.
Advertising
This manual is related to the following products: