Integra DTR-8.2 - Manual (Page 12)

12
Remote controller
: When the input source is a digital source, this button works
as the same for the Surr button. When the input source is Analog/
PCM, this button changes the listening mode between Dolby Pro
Logic II Movie and Dolby Pro Logic II Music.
dts: When the input source is a digital source, this button works as
the same for the Surr button. When the input source is Analog/PCM,
this button changes the listening mode between DTS Neo:6 Music
and DTS Neo:6 Cinema.Neo6:Cinema
→ DTS Neo6:Music.
THX: Changes the listening mode to the THX listening mode.
When the THX listening mode is selected
• When playing back Dolby Digital sources
Switches the THX Surround EX mode (Auto
→ On → Off) if the
source is a Dolby Digital-compatible source.
• When playing back Analog/PCM sources
Switches the decoding mode (Pro Logic II Movie
→ DTS
Neo6:Cinema) for THX processing.
• When playing back DTS sources
Allows you to enjoy the DTS THX Cinema, DTS-ES Discrete
6.1 THX Cinema, and DTS-ES Matrix 6.1 THX Cinema
surround systems. The DTS-ES mode changes from Auto
→ On
→ Off.
All CH Stereo: Changes the listening mode to All Channel Stereo
listening mode.
DTS / : Changes the listening mode as shown below.
Mono
→ Direct/Pure Audio → Stereo → Theater-Dimensional →
Surround
→ THX → Mono Movie → Enhanced 7 → Orchestra →
Unplugged → Studio-Mix → TV Logic → All Ch Stereo → Mono.
If pressed, the listening mode for the selected input source set in the
Listening Mode Preset is also changed.
Display: For changing the display in the front display.
Re-EQ: Depending on the listening mode, you can turn the cinema
re-equalization function on or off. [43, 46]
Third operation menu (page 3/3)
Setup button
For displaying and quitting the setup menu. [30]
Return button
For entering the selected setting and returning to the previous menu. [30]
Test button
Outputs a test tone for setting speaker levels.
Use this button in conjunction with the +/–and CH Sel buttons to
calibrate the speakers levels without entering the Setup menu. When
TEST button is pressed, the test noise (pink noise) is output. Use the
+/– buttons to increase or decrease the sound level. Use the CH Sel
button to change from speaker to speaker. For a more detailed
explanation of how to calibrate the speaker levels, see page 34.
Dim button
Adjusts the display brightness.
There are three settings available: normal, dark and very dark. [53]
/ / / , Enter buttons
When selecting items in the Setup menu, press the upper and lower
portions to select item, press the right and left portions to select
parameter values or modes, and press Enter to select item. [30]
+/– buttons
Select the speaker whose volume is to be adjusted using the CH Sel
button and adjust the volume using the +/– buttons. [53]
Sleep button
Sets the sleep function.
The Sleep button enables you to set the DTR-8.2 to turn off
automatically after a specified time period. [53]
SP A/B buttons
These buttons are not used with the DTR-8.2.
CH Sel button
For selecting the speaker for level adjustment. Used together with
the +/– buttons. [53]
(Page 3/3)