Integra DTR-8.2 - Manual (Page 85)

85
High-resolution (320 x 240) liquid crystal display (LCD) with contrast control
Large touchscreen
Seven programmable direct-access buttons
Backlighting for LCD and direct-access buttons
Infrared sending and learning eyes
3-wire (RS232) serial port connector
Dynamic, animated interface
Editable macros (up to 255 commands per macro)
Total number of devices and macros limited only by memory
Database with RC codes to operate different brands
Operating distance of 10 meters (33 feet)
Learning frequency up to 56 kHz
Learning distance 5 cm (2 inch) up to 30 cm (1 foot)
Operating distance of approximately 20 meters depending on the surrounding conditions
Band:418 MHz
Bandwidth: +/–100 kHz
16 Extender ID’s and 4 Channels
2 MB non-volatile flash memory (retains commands when batteries are not present)
512 K SRAM
4 AA 1.5 V batteries, or one 4,8V rechargeable battery pack
Approximately 6 months with typical use
Power on by tapping the touchscreen, power off automatically management
153.6 x 94.1 x 43.7 mm (6.0 inch x 3.7 inch x 1.7 inch)
0 ˚C to 50 ˚C (32 ˚F to 122 ˚F)
Remote controller recharge package BCC-5
RF Receiver RFR-5
Hardware
Software
Infrared (IR)
Radio
frequency (RF)
Memory
Batteries
Battery life
Power management
Dimensions
Operating temperature
Accessories
(Not included)
Specifications
Database information:
Designed by UEI Technology
Licensed under U.S. Patent 5,689,353
Portions
 UEI 1999
The specifications and design of this product are subject to change without notice.