Intel Integrated Touchscreen Computer J2 650 User Manual
Page 13
650 System Manual (Draft)
Version 0.4 August 20, 2008
13
I/O Ports
The 650 is an integrated design with all the electronics in the head. Most I/O ports are
accessible in the cable well at the bottom of the unit. A cover plate is provided to cover
the cables.
I/O Panel
Off / On Button
The Off /On button is located in the cable well, as shown. This button is located near the
side to prevent accidental powering down by the user. The function of the button can be
controlled by the OS. If the 650 hangs for some reason it can always be powered off by
holding the Off / On button in for six seconds.
The 650 also supports the following: Restore on AC on power loss, Wake On LAN, and
Wake On RTC alarm features to control the system power up. Please see the BIOS setup
section of this manual and J2 white paper “Reducing Your Carbon Footprint in the POS
Environment” (September 2008).
Off / On button Location