Intel Integrated Touchscreen Computer J2 650 - Manual (Page 7)

650 System Manual (Draft)
Version 0.4 August 20, 2008
7
Specification
Main board
CPU Support
Intel Desktop Processors LGA775, 1066 MHz FSB, 65W TDP max
Intel 1.6 GHz Celeron 420 Conroe Core, Standard
Chipset
Intel Q965 North Bridge, Intel ICH8R South Bridge,
HD Audio VIA1708B, Ethernet Realtek 8111C
System Memory 2 x 240-pin DDR2 DIMM 533/677/800 MHz sockets - up to 4 GB
Graphic memory Share system memory 8MB~256MB
BIOS AMI
LCD Touch Panel
LCD Size 15” TFT LCD
Brightness 250 nits, adjustable in 8 steps to 25nits, auto adjust mode
Resolution 1024 x 768
Touch Screen 650RT Resistive 5 wire, 650ST SAW
Tilt Angle 0
゜~ 90゜
Storage
HDD Two 2.5 SATA HDD bay, RAID Support, Quick Change-hot swap
Flash Memory CF adapter Quick Change
Internal Expansion
USB 2.0 Two, one normally used for 802.11n wireless card
I/O Ports
USB Four x in cable well / 1 x on left side
Serial Three, DB9 ( COM 2 /COM 3 pin 9 with 12V by BIOS setting )
Parallel One, DB25 in cable well
LAN (10 /100/ 1000) One, RJ45 in cable well (Realtek 8111C)
2
nd
Display
One, supports standard PC monitor or optional
(J2 provided) secondary customer side display
Cash Drawer 2 x RJ 11 24V with status
DC In 1 Power in, 19VDC 7.1 amps
Audio Jack
One headset, one microphone-in, left side (VIA1708B)
Printer Power
+24 V 2.5 amps, supports most 24V POS printers,
Power Cable included
Power LED Located under front panel logo - green for on, amber for standby