Intel Integrated Touchscreen Computer J2 650 - Manual (Page 28)

650 System Manual (Draft)
Version 0.4 August 20, 2008
28
Removing the Back Cover
The following steps show how to disassemble the 650 for servicing:
On a clean, protected surface, place the unit screen-side down. Remove the two cover
screws as shown. Carefully lift the back cover as shown.
Remove two screws as shown
Carefully tilt up the back cover
Note: The 650 was designed so that the internals of the unit could be accessed without
having to remove the mounting base or the mounting bracket of the unit.