Intel Integrated Touchscreen Computer J2 650 - Manual (Page 69)

650 System Manual (Draft)
Version 0.4 August 20, 2008
69
Beep on Error: This setting will disable or enable the MSR double beep tone on a bad
read. No data is output on a bad read.
Inter-Character Delay: This sets the delay between characters sent by the MSR. The
delay is set in milliseconds.
Track Settings: Enable or disable the sending of track data, sentinels and LRC here.
Advanced Settings
Preamble and Postambles can be added here, in addition to track separators and end of
data terminator.