Intel Integrated Touchscreen Computer J2 650 - Manual (Page 26)

650 System Manual (Draft)
Version 0.4 August 20, 2008
26
Wall Mounting Bracket
A wall mount/VESA adapter bracket is supplied standard with the 650 unit.
This bracket allows the unit to be mounted to a wall or other surface. The wall mounting
bracket is a one piece bracket with four mounting holes (plus VESA mounting holes: see
next section). This mounting bracket would first be attached to the mounting surface, and
then the unit would be slid on to the mounting bracket hooks. After the unit is secure the
Locking Screw should be installed to ensure the unit cannot be accidentally knocked off
the bracket.
The units slides on to the mounting bracket hooks
Locking Screw location
NOTE:
Wall mounting screws are not supplied, as different types of walls require different
type of screws. Please be sure the mounting screws used can support the weight of the
unit.