Intermec PB50 - Manual (Page 16)

Chapter 1 — Using the PB50 Mobile Label and Receipt Printer
6 PB50 Mobile Label and Receipt Printer User’s Guide
There is only one LED on the PB50 printer: the Ready-to-Work
™
indicator.
Understanding the Printer Sounds
The PB50 plays sounds in response to several actions that you can
take with the printer. Use the following table to understand when the
sounds occur and what they mean.
Understanding the Ready-to-Work Indicator
Indicator State Description
Off When the light is off, it can mean one of several
conditions:
• The printer is in Standby mode.
• The printer is in Info mode.
• The printer is in Setup mode.
On The PB50 is powered on and operating.
Blinking A blinking light can mean one of several conditions:
• The printer is out of paper.
• The media cover is open.
• There is a printer error that requires you to perform an
action. For a list of possible problems, see
“Troubleshooting the PB50” on page 42 .
Understanding the Printer Sounds
Sound Occurs When:
Power • You supply power (battery or AC adapter) to the
printer.
• The PB50 starts charging the battery.
Hardware You open the media door, close the media door, or insert a
cable.
Button You press any of the PB50 buttons.
Error • The printer cannot feed paper or print a job because of
a hardware issue such as the media door open, a paper
jam, or there is no media.
• An error occurs such as a paper jam or a print error.