Intermec PB50 - Manual (Page 33)

Chapter 2 — Configuring the PB50
PB50 Mobile Label and Receipt Printer User’s Guide 23
Changing Configuration Settings
There are several ways you can change the configuration settings of
the printer. You can change the configuration settings:
• from the display.
• from the host PC using PrintSet.
• from the host PC using the command line.
• from the printer home page.
• from the SmartSystems Console.
Changing Configuration Settings From the Display
You need to enter Setup mode before you can change configuration
settings. For more information on entering Setup mode and
navigating through the settings, see
“Understanding Setup Mode”
on page 19 .
The top levels of the Setup menu are organized in a one-way loop.
Each level has several sub-levels.
Dump Mode This options enters Dump mode. For more
information
on Dump mode, see
“Troubleshooting Communication
Problems” on page 46
.
Factory Default This option restores the factory default
settings. Press
to select this option and
then follow the instructions on the screen.
Setup and Exit This option exits Extended Test mode and
puts the printer in Setup mode.
Exit This option exits Extended Test mode.
Options in Extended Test Mode (continued)
Function Description
Note: The ESC/P printer does not have a Setup menu.