Intermec PB50 - Manual (Page 30)

Chapter 2 — Configuring the PB50
20 PB50 Mobile Label and Receipt Printer User’s Guide
Once you enter Setup mode, there are two editing modes: normal and
enhanced.
Normal Editing Mode: In normal editing mode, you see an up arrow and a right
arrow for making selections.
Enhanced Editing Mode: In enhanced editing mode you have a plus sign and a
right arrow to change the value of numeric fields.
Understanding Error Mode
The printer enters Error mode when it detects an error condition such
as a low battery or a paper fault. Some error messages appear on the
screen immediately when they occur, such as DOOR OPEN. Other
error messages do not appear until you press the
Info button. If there
is more than one error at a given time, the errors display in the order
that they occurred.
Editing Settings in Setup Mode
Editing Mode To Navigate To Accept Value
Normal • Press to move among
choices.
• Press to go up a level
in menu system.
Press .
Enhanced • Press to move within
the editable fields. When
the field blinks, you can
edit it.
• Press to increase the
value of the field.
Press .
BAUDRATE:
9600
+
IP ADDRESS:
1 30.42.240.102