IBM SY27-0345-06 - Manual (Page 30)

MAP 0130: No LEDs Are On
001
Are the LEDs on the opposite side of the unit on?
Yes No
002
Go to Step 008.
003
Are the LEDs on the port side on?
Yes No
004
Replace the system board. Then, go to “MAP 0210: Verify Operation” on
page 2-23.
005
Remove the cover using the instructions in “Removing the Cover” on page 4-2.
Is the cable connecting the system board to the LED panel securely seated?
Yes No
006
Seat the cable. Go to “MAP 0210: Verify Operation” on page 2-23.
007
Replace the LED panel. Then, go to “MAP 0210: Verify Operation” on page 2-23.
008
Is the fan running?
Yes No
009
Make sure that:
The IBM 2210 is plugged into the wall outlet.
The wall outlet has the correct voltage.
The line voltage at the end of the power cord is correct.
(Step 009 continues)
2-8 2210 Service and Maintenance