IBM SY27-0345-06 - Manual (Page 44)

MAP 0200 (continued)
009 (continued)
Is this the Dial Access Adapter?
Yes No
010
Replace the adapter, then go to “MAP 0210: Verify Operation” on
page 2-23.
011
Is the amber status LED on or blinking?
Yes No
012
Replace the adapter, then go to “MAP 0210: Verify Operation” on
page 2-23.
Note: The Dial Access Adapter feature has two 4-port Dial Access Modem
Cards and a Dial Access Base Adapter. Any of these cards could be failing.
Replace the cards one at a time and retry.
013
Power down, reseat the adapter, and reinstall.
Is the amber status LED light still on or blinking.
Yes No
014
Go to “MAP 0210: Verify Operation” on page 2-23.
015
Do you have the maintenance terminal (PC) needed to run diagnostics?
Yes No
016
Power down and replace the Dial Access Adapter. Then go to “MAP 0210:
Verify Operation” on page 2-23.
017
Run the diagnostics program. Look at the error code to determine which 4-port Dial
Access Modem Card to replace.
Power down and replace the appropriate 4-port Dial Access Modem Card. Then go
to “MAP 0210: Verify Operation” on page 2-23.
2-22 2210 Service and Maintenance