Invacare CROSSFIRE T6 - Manual (Page 19)

SECTION 2—SAFE HANDLING
Part No 1148078 19 Crossfire™Series Wheelchairs
5. If equipped, turn the anti-tippers down. Refer to Footrest on page 25 in this manual.
ƽ WARNING
DO NOT use an escalator to move a wheelchair between floors. Serious bodily
injury may occur.
Transferring To and From Other Seats
ƽ WARNING
BEFORE attempting to transfer in or out of the wheelchair, every precaution should
be taken to reduce the gap distance. Turn both casters parallel to the object you are
transferring onto. Also be certain the wheel locks are engaged to help prevent the
wheels from moving.
When transferring, position yourself as far back as possible in the seat. This will
prevent damaged upholstery and the possibility of the wheelchair tipping forward.
NOTE: For this procedure, refer to FIGURE 2.4.
NOTE: This activity may be performed independently provided you have adequate mobility and
upper body strength.
Position the wheelchair as close as possible along side the seat to which you are
transferring, with the front casters parallel to it. Remove the armrest, if installed. Engage
wheel locks. Shift body weight into seat with transfer.
During independent transfer, little or no seat platform will be beneath you. Use a transfer
board if at all possible.
FIGURE 2.4 Transferring To and From Other Seats