Invacare CROSSFIRE T6 - Manual (Page 22)

SECTION 3—SAFETY INSPECTION
Crossfire™Series Wheelchairs 22 Part No 1148078
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Ensure casters are free of debris.
❑ Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Periodically
❑ Ensure wheelchair rolls straight (no excessive drag/pull to one side).
❑ Ensure wheel locks are easy to engage.
❑ Ensure that the casters are free of debris.
❑ Inspect seat and back upholstery for rips or sagging.
❑ Ensure camber bar mounting clamps are securely tightened.
❑ Ensure no excessive side movement or binding when lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Clean upholstery and armrests.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Ensure casters are free of debris.
❑ Check that all labels are present and legible. Replace if necessary.
Troubleshooting
CH
AIR
VEER
S R
IGHT
CHA
IR VEER
S
LEFT
SLU
GGISH T
U
R
N
OR
PERFOR
MA
NCE
CAST
ER
FLUT
T
ERS
SQ
UEA
K
S AND
RA
TTLES
LO
OSENES
S IN CH
AIR
SOLUTIONS
X X X X Check tyres for correct and equal pressure.
X X X X Check for loose stem nuts.
X X Check spokes and nipples.
X X X
Check that both casters contact the ground at
the same time.