Invacare CROSSFIRE T6 - Manual (Page 27)

SECTION 4—FOOTREST
Part No 1148078 27 Crossfire™Series Wheelchairs
Adjusting Footplate Angle
1. Loosen, but DO NOT remove the two mounting screws and locknuts (not shown) that
secure the footplate to the two footrest tubes.
2. Position the footplate to the necessary angle to accommodate the user.
3. Retighten the two mounting screws and locknuts.
NOTE: The locknuts should lie in the channel of the footplate clamp.
Adjusting Footplate Depth
1. Remove the two mounting screws and locknuts (not shown) that secure footplate to
the footrest tubes.
NOTE: Observe the angle of footplate for reinstallation.
2. Move the footplate to one of two mounting positions to accommodate the user.
3. Using the two mounting screws and locknuts, secure the footplate to the footrest
tubes.
NOTE: The locknuts should lie in the channel of the footplate half clamp.
FIGURE 4.3 Replacing/Adjusting Optional Adjustable Angle Footrest
Footrest
Tube
Mounting
Positions
Footplate
Locknut
(Not Shown)
Angle
Depth
Height
Clamp
(Allen
Screw)
Mounting
Screws
Adjustments
Wheelchair
Frame
Clamp
(Allen Screw)