I-O Display Systems Basic I/O Product - Manual (Page 30)

Setup & Installation 2
2-13(Vol.1)
BASIC I/O setup:
BASIC I/O setup is accomplished with a sequential display and pushbutton. Below is a
diagram of the location of these components.:
Figure 2-9 BASIC I/O Connectors, Switches and Indicators.
Unit type (digital or analog), Unit address, baud rate, and 2 or 4 pass protocols are all
pushbutton configurable and appear on the sequential display. After line power application
and the performance of system diagnostics, there is a five second period during which these
setup values any be changed. Changed values are automatically saved on a non-volatile
EEPROM.