I-O Display Systems Basic I/O Product - Manual (Page 8)

The Basic I/O 1
1-3(Vol.1)
ANALOG OUTPUTS:
Analog output modules are 100% isolated. These self-sourcing modules provide the voltage or
current necessary to drive standard instrumentation loads. All are updated every 10 Ms, or 100
times per second.
Analog output instruction types are:
Level Value Can set output levels, as a fraction of the module’s full scale
range, and are specified with 12 bit (1 part in 4096) resolution.
Waveforms Can provide square, triangle, sawtooth or ramp waveforms,
Maximum and Minimum amplitudes, as a fraction of the output
module’s full scale range, are specified with 12 bit (1 part in
4096) resolution. Waveform periods are specified from 0.1 to
6,553 seconds (about 109 minutes).