Icom IC-2200H - Manual (Page 18)

5 - 2
‘ ‘ CONNECTIONS
pin 6 (MIC)
pin 4 (PTT)
pin 7 (GND)
pin 5 (MICE)
to the antenna connector
STANDARD SIGNAL GENERATOR
0.1 300 MHz
127 to 17 dBm (0.1 V to 32 mV)
RF POWER METER
50 , 1 80 W
FM DEVIATION
METER
ATTENUATOR
50 dB or 60 dB
POWER SUPPLY
13.8 V, 20 A or more
CAUTION!
DO NOT transmit
while an SSG is
connected to the
antenna connector.
JIG CABLE INFORMATION
to the microphone connector
AUDIO GENERATOR
300 Hz to 3 kHz
ADJUSTMENT ITEM EXPLANATION
Fr
dt+[DIGITAL] tr tr tr tr Sq Sr
rE
*dF *Et
*F9 *F2 *F3 *F4 *F5 *F6 *F7
*F8 *dE *F9 *FA
*F0 *F1
*CS *dt
*F2
*F1
*F3 *F5 *F7 *F4 *F6 *F8
PO
Starting item
PO+[MID] PO+[MID]+[LOW] PO+[LOW] PU dE *dP dE+[DIGITAL] dt
*bP
*dE *dE
*53 *54 *55 *56 *57 *51+[.] *52+[.] *55+[.] *53+[.] *54+[.] *52
*56+[.] *57+[.]
Sr+[.] *C6
*dd *dd *db *dd *db *db *db *dE+[DIGITAL]
*dE+[DIGITAL] *dE+[DIGITAL] *dd+[DIGITAL] *dd+[DIGITAL] *dd+[DIGITAL] *dd+[DIGITAL]
*dd+[DIGITAL]
*dd
*FN *FN *dU *FN *FN
*db+[DIGITAL] *db+[DIGITAL] *db+[DIGITAL] *db+[DIGITAL] *db+[DIGITAL]
*PN *PP *51
NOTE: DO NOT adjust items
with "*" mark at below
explanation. Those items are
adjusted automatically when
other adjustment items are
adjusted.
*Not adjust items