Iluv i199 - Manual (Page 10)

Stereo Audio System for Your iPod V11M11_IM_EN_01122007
www.i-Luv.com - 9 -
GETTING STARTED
IMPORTANT:
1.
Occasionally, files on your iPod can become corrupted. This may cause an erratic behavior with your iLuv products. Apple Computer recommends that
you visit their website www.apple.com to obtain instructions on resetting or restoring your iPod to factory settings.
2. It is imperative that you use the correct dock adapter for your iPod and that the dock adapter fits appropriately into the built-in universal dock. Ignoring
these rules can cause severe damage to your iPod. Please refer to the section “Installing the Dock Adapter” to properly install the dock adapter before
operating the i199 with your iPod.
Using AC Power
Locate the AC power plug on the back of the unit. Insert the end of the supplied power cord into the wall outlet.
Installing the Backup Battery for Clock and Alarm Settings
In order to offer consistent clock settings and alarm functions, the i199 uses a Backup Battery system. This means that in the event of a power failure, all the
settings of the i199 will remain saved. For example, after the installation of the Backup Battery, the AC cord is disconnected or a power failure occurs, the
display will NOT remain lit, but the time and date settings will be temporarily maintained. The alarm, however, will not sound when the i199 is powered only
by the Backup Battery. To install Backup Battery, follow the instructions below:
1.
Make sure the connection between the AC power supply and the unit is secure. This is important because during battery replacement it is possible for
all settings to be lost if the clock and alarm have already been set.