Iluv i199 User Manual
Page 16
Stereo Audio System for Your iPod
V11M11_IM_EN_01122007
www.i-Luv.com
- 15 -
OPERATIONAL INSTRUCTIONS
Setting the Clock
1.
To set the time, locate the TIME SET button. Press and hold the TIME SET button down until the Time display begins to flash. Set desired hour by
using or control button on the unit. Once desired hour is selected, press the TIME SET button once more to set Minutes. Use or control
button until the desired time is displayed. (NOTE: AM / PM indicator displays are located on the left side of the time.)
2.
To secure the time setting and move to next setting, press the TIME SET button which will set the time and move you to date setting
3.
To set the correct month, you may use or control button until the desired month is displayed or press the TIME SET button to secure month
setting and move to next setting.
4.
Use same method to set desired day/year.
5.
Once these steps are complete, Press the TIME SET button to secure time and date setting.
Setting the Alarm
This unit supports dual alarm feature.
1.
Press and hold either ALARM 1 or the ALARM 2 button until the display begins to flash. Use or control button until the desired alarm time is
displayed, press ALARM 1 or ALARM 2 button to confirm and enter to next setting.
(NOTE: AM/PM indicator displays are located on the left side of the
time.)
2.
After setting the time, Use or control button and select the option for desired source for the alarm. Choose from iPod, USB, CD, AM / FM Radio or
buzzer. For AM/FM radio sources, you need to select the desired preset station.
3. Press
ALARM 1 or ALARM 2 button to pre-set the volume level when the Alarm(s) is (are) activated. Use or control button to adjust the volume
level from 1 to 30. When the Alarm(s) is (are) activated, the volume will gradually rise from low to the pre-set setting.
4. Press
the
ALARM 1 or ALARM 2 buttons again to secure the setting and exit the alarm setting mode.
Notes: Make sure the alarm volume level set to desired level and the i199’s display has icon indicating alarm armed.
Using the Alarm Function
1.
To preview the alarm setting, press Wake to Button and display will scroll through current alarm setting.