Iluv i199 User Manual
Page 29
Stereo Audio System for Your iPod
V11M11_IM_EN_01122007
www.i-Luv.com
- 28 -
OPERATIONAL INSTRUCTIONS
Example (TX Mode): If you have a Stereo Headset with Bluetooth technology (Mono will not work, only stereo headphone with A2DP Bluetooth
profile will work), you can set the BluePin
TM
to Transmit (TX) the music that is currently playing on i199 to the headphone.
NOTE: Certain Headsets with Bluetooth technology are not compatible with the BluePin
TM
, please check with your dealer for compatibility. The
best product for this operation is iLuv Stereo Headset with Bluetooth technology, which is fully compatible with BluePin
TM
. Devices with Bluetooth
technology you are trying to pair MUST support A2DP Profile.
7.
To pair with cell phones, PDA, or other devices with the BluePin
TM
(RX Mode):
•
First connect the BluePin
TM
to i199’s BluePin
TM
port. The BluePin
TM
blue light will fast flash of search mode ready.
•
Push and hold the pairing button until LED displays blue and red light flashing.
•
From your cell phone or other devices, go to Bluetooth setup in the devices menu. Depending on the devices menu will differ.
•
Does a search for devices, when initiated your device will look for any devices with Bluetooth technology in the area.
•
When the search is done you will see a device named “RX-i110”. Select the device and your device will prompt for password.
•
The default password for our BluePin
TM
unit is “0000”, enter password and your device will let you know if pairing was successful.
•
Once connected, you will be able to play the songs from MP3 cell phones or other devices with Bluetooth technology and hear it from
our i199 unit.
•
You can use the PLAY/PAUSE, PREV, NEXT buttons of i199 to remote control the MP3 cell phones or other devices that support
AVRCP profile.
Note: Depending on the device, these functions might be disabled due to differences in software.
8. To
pair
with
Bluetooth Stereo Headset with Bluetooth Stereo Profile (A2DP)(TX Mode):
• Set
BluePin
TM
’s switch to TX for transmitting to the Headset.
• Place
the
BluePin
TM
in the i199’s BluePin
TM
port, push and hold pairing button until you get red and blue flashing light.