Iluv i199 - Manual (Page 25)

Stereo Audio System for Your iPod V11M11_IM_EN_01122007
www.i-Luv.com - 24 -
OPERATIONAL INSTRUCTIONS
Listening to Other Audio Devices using line-in port
You can still listen to the first, second, and third generations of iPod, or any other audio players other then iPod, with the i199 by simply using the AUX-IN
port, located on the rear of the i199.
1.
Insert the plug of the audio patch cord (Not Included) into the HEADPHONE or LINE-OUT jack on your audio device, and then insert the other end of
the patch cord with 3.5mm Stereo plug into the AUX-IN jack, located on the rear of the i199.
2. For AUX mode, press the FUNC button on the i199, or on the Remote Control, until the AUX icon appears on the i199’s display.
3. It is now safe to turn ON your device and enjoy the music.
4. Use the VOLUME button on the i199, or the (Volume +) and (Volume –) buttons on the Remote Control to adjust the decibel level. You
may also need to adjust the audio device volume.
Charging Your iPod
Your iPod will always be in charge mode when left in the built-in Universal Dock until it is fully charged. Your iPod will also be in charge mode when not in
use if your iPod is left in the Built-in Universal Dock. Your iPod will not charge when the unit is NOT docked in the built-in Universal Dock.
Note: Older generation (Including 3G) iPod not supported, only newer 30pin connectors are supported by i199’s Universal Dock. Please see compatibility list
for the i199.
AUX-IN