InFocus 620 User Manual

Page 10

Advertising
background image

5

SETTING UP THE PROJECTOR

1

Place the projector on a flat surface.

•

The projector must be within 10 feet of your power source
and within 10 feet of your computer.

NOTE: An optional extension

cable, sold separately, lets you

increase the distance between the

projector and your computer to 50

feet. See “Accessories” on

page 53.

•

If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear Projection”
on page 40 to re
verse the image.

•

If you are installing the projector on the ceiling, see the
LitePro 610/620 Ceiling Mount Installation Guide for recom-
mendations. To turn the image upside down, see “Ceiling”
on page 39.
The Ceiling Mount Kit is sold separately. See
“Accessories” on page 53.

2

Position the projector the desired distance from the screen.

•

The distance from the lens of the projector to the screen
determines the size of the projected image. Figure 2 shows
three projected image sizes for the 610; Figure 3 shows
image sizes for the 620. For more information, see “Pro-
jected Image Size” on page 60.

3

Make sure the projector and your computer are turned off.

F

IGURE

2

Projected image size for LitePro 610

5 ft

.

10 ft.

25 ft.

PROJECTOR

Advertising