InFocus 620 User Manual
Page 44
40
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Rear Projection
When you select Rear Projection, the projector reverses the image
so you can project from behind a translucent screen.
•
Click either mouse button to reverse the image for rear projec-
tion.
Monitor Connect
When Auto is selected, the projector attempts to pick the correct
monitor connection based on the input signal it receives. This set-
ting produces the best results in most situations. Select “On” or
“Off” only if the image is very dim or not projected.
•
Select “On” if your monitor is connected directly to the
CableWizard and the images are excessively dim.
NOTE: Do not select “Off” if
your monitor is connected directly
to the CableWizard.
•
Select “Off” if your monitor is not connected directly to the
CableWizard and the image is not projected. (Some IBM
ThinkPad computers exhibit this problem, especially the
ThinkPad 760.)