InFocus 620 User Manual

Page 50

Advertising
background image

46

M

a

i

n

t

e

n

a

n

c

e

&

T

r

o

u

b

l

e

s

h

o

o

t

i

n

g

6

If you’re using a laptop computer and its monitor is not dis-
playing your presentation, make sure you have re-activated
the computer’s monitor. Most laptop computers de-activate
their own monitor when a second display device, such as a
projector, is connected. Refer to page 55 for more information.

7

If the problem still exists, read through the problems and
solutions in this chapter.

If you call Customer Service for assistance:

•

Find out what kind of graphics controller card is installed in
your computer. The projector is connected to this circuit board
in the computer. Most PCs use a VGA or SVGA graphics con-
troller.

Solutions to Common Problems

Problem: Nothing on projection screen
•

Make sure that the power cord is properly connected to a func-
tional AC electrical outlet. Make sure that the power cord is
properly connected to the projector.

•

If the projector is plugged into a power strip, make sure the
power strip is turned on.

•

Make sure the projector is switched on.

•

Make sure the projector’s lamp is securely connected. See
“Replacing the Projection Lamp” on page 41.

•

Make sure that the CableWizard and the cables do not have
any bent pins. Check the power cord for bent pins also.

•

Make sure the projector is adjusted properly. See “Basic Image
Adjustment” on page 25.

Problem: Color or VGA text not being projected
•

You might need to adjust the brightness up or down until the
text is visible. Refer to “Brightness” on page 29 for more infor-
mation.

•

Verify that the appropriate input source is selected. See “Com-
puter” on page 29 or “Video” on page 31.

Advertising