IBM Oce TDS400 - Manual (Page 113)

Océ Power Logic®: The Settings Editor 113
In order to perform special System Administrator functions, you must log on
to the Océ Settings Editor as a System Administrator (see ‘User modes’ on
page 137).
Note: When you are finished, make certain you log off from the System
Administrator mode of the Océ Settings Editor to prevent unauthorized use of
the Océ TDS400.
▼ Make System Administrator settings in the Océ Settings Editor
1 Maximise the Océ Settings Editor on the screen.
2 Log on as System Administrator.
See ‘User modes’ on page 137 for more information about logging on to the
Océ Settings Editor.
3 Click on one of the top buttons to display the desired group of settings.
4 Select the setting you want to update in the tree structure.
5 Update the setting in the update area, as required.
Note: A few settings, such as the default pen settings, are made directly
from the tree structure area.
6 Click on the ‘Apply’ button.
The new value is now applied for the setting
7 Log off from the System Administrator mode when you are finished updating
settings.