User operations, User operations 119 – IBM Oce TDS400 User Manual
Page 119
Océ Power Logic®: System Control Panel
119
User operations
The Océ System Control Panel allows you to perform the following operations:
■
Make a demo print
■
Print your system configuration
■
Clear the system
■
Shut down the system
▼
Make a demo print
1
Select the Demo print option in the System menu.
A demo print is made on the printer.
▼
Print your system configuration
1
Select the Print settings option in the System menu.
A list is printed of the current settings on the Océ Power Logic® Controller.
▼
Clear the system
1
Select the Clear system option in the System menu to delete all jobs.
You can use this option in case of a corrupt job which can not be deleted with
the help of the Océ Queue Manager.
Note:
This option is only available in repro operator, key operator and
system administrator mode. In anonymous user mode it is not possible to
clear the system.
▼
Clear the system on printer panel
1
Press the ‘on-line’ key to put the printer off-line.
2
Select the ‘System’ item with the
or
key.
3
Press ‘next/select’ to enter the ‘System’ menu.
4
Select ‘Clear setmem’ with the
or
key.
5
Enter password
6
Press ‘next/select’ to enter the ‘Clear setmem’ menu.
7
Select the ‘on’ or ‘off’ with the
or
key.
8
Press ‘on-line’ to put the printer on-line again.
▼
Shut down the system
1
Select the Shut down option in the System menu to shut down the system.
Note:
This option is only available in repro operator, key operator and
system administrator mode. In anonymous user mode it is not possible to
shut down the system.