IBM Oce TDS400 - Manual (Page 193)

Troubleshooting 193
[118] Situation A: No mechanical errorSituation B: Mechanical error
4 If there are, remove the tape strips in the reinforcement unit.
Note: If the protection sheet is not on the reinforcement strip (see situation
A in figure 118), there is no mechanical error and you should insert a new
tape roll as described in ‘How to insert a new tape roll’ on page 165. If this
error frequently occurs you should call Customer Service.
5 Remove all tape between the rollers and knives (see Figure 119).
[119] Removing the tape
6 Lead a new trailing strip of tape between the rollers and knives. For more
information see ‘How to insert a new tape roll’ on page 165.