IBM 6644 - Manual (Page 45)

32 User Guide
Changing the startup sequence
To view or change the primary or automatic power-on startup sequence, do the
following:
1. Start the Configuration/Setup Utility program (see “Starting and using the
Configuration/Setup Utility program” on page 27).
2. Select Start Options and press Enter.
3. Select Startup Sequence from the Start Options menu and press Enter.
4. Use the arrow keys to make your selections, and press Esc until you return to
the Configuration/Setup utility program menu.
5. Select Save Settings from the Configuration/Setup utility menu and press
Enter; then press Esc and follow the instructions on the screen to exit from the
Configuration/Setup utility program.
If you have changed these settings and want to return to the default settings,
select Load Default Settings on the main Configuration/Setup Utility menu.
Pentium III microprocessor serial number feature
Some models have an Intel Pentium III microprocessor that features a unique
electronic identification number designed to enhance security during electronic
commerce transactions and to hamper software piracy.
To change this setting, do the following:
1. Start the Configuration/Setup Utility program. See“Starting and using the
Configuration/Setup Utility program” on page 27.
2. From the Configuration/Setup Utility program menu, select Advanced
Setup and press Enter.
3. At the Advanced Setup menu, select Processor Control and press Enter.
4. Select CPU Serial Number.
5. Press the right arrow key to change the setting to either Enabled or Disabled.
6. Press Esc two times to return to the Configuration/Setup Utility program
menu.
7. Select Save Settings and press Enter.
8. Select Exit Setup and press Enter.
9. When prompted, press Enter to exit from the Configuration/Setup Utility
program.
For more information about the Pentium III microprocessor, visit
http://www.intel.com/pentiumiii/utility.htm on the World Wide Web.